isit the 'cradle' of the Rolls-Royce Phantom

The cars to Rolls-Royce Phantom is Produced almost all the craft and it takes about 2-3 months to ship a.

Outside the factory in Goodwood Rolls-Royce is a scene no less romantic park.

Although the Ghost launched the second year, pen in the eyes of Many, the Phantom Remains the iconic cars of Rolls-Royce as well as all the cars to the world. BMW's proprietary long, pen only about 10% of the parts of the Phantom was imported from Germany. Even the Entire staff in the factory in Goodwood (UK) are indigenous.

It can be said Rolls-Royce Phantom production line unlike any other manufacturer in the world. Each of the Phantom to be paying much Attention to each centimeter and it takes 2-3 months to complete, ensuring maximum accuracy over the original design.

The frame of the car with aluminum block V12 is the only parts made in Germany.

First, the aluminum body of the vehicle was manufactured in Dingolfing (Germany), where They are welded by hand, using the latest technology of the BMW. Then the body was moved to paint factory in Goodwood, where two robots will handle the painting. Tuy nhiên, the preparation and testing continue to be done manually.

Of the 19 basic colors, black is the color hầu chosen, although Rolls-Royce has 44.000 Different colors to mix to serve the customer's wishes. "Our Customers Spend $ 330,000 per vehicle, compared They deserve to get what They want", the Representative of Rolls-Royce said.

Spray paint is made with only the robot.

Special Services Division of Rolls-Royce has about 28 people, and a list of Customers waiting for service always Lasts about 8 months. Tuy nhiên, each customer would like to own a Rolls-Royce "not in touch" will have the Opportunity to meet Mr . Ian Cameron - the design of the Phantom. Once there, họ They will present ideas, and the Rolls-Royce engineers will design tasks, testing and Inspection to Ensure satisfaction to the maximum of Their Customers are still not loss of traditional beauty of the Phantom .

When color is selected, the vehicle door system will be assembled by hand and tested with digital clock, mounted a special key, the car will not move against you because if not close đúng. Then the body will be wrapped a layer of magnesium alloy to Prevent vibration or hum During vehicle operation.This coating has a hardness of 2.5 times the F1 race car, that's why the sound quality inside the Rolls-Royce Phantom is so sharp.

All Stages are checked carefully.

Then the body will be Transferred to the motor assemblies. Phantom V12 engine block using 6.75 liter capacity Produced by hand at the BMW plant. Although Developed in parallel with other block V12 engine, the engine for Phantom ownership pen torque much lower, than the engine will last longer and Achieve higher performance, suitable for a Heavy vehicles over 2 tons as Phantom.

When all the processes đó are ready at the work of the specialist interior design begins. There were about 40 People working in this department, with 15-18 Different skin types to choose the three best matches of each vehicle. The whole work was done cũng by hand, except to use a laser to cut the skin to Ensure accuracy.

When the leather and the interior has been completed Basically, the car Began to vibrate checked to Ensure there are no errors, then check on line before the official be Delivered to Customers.

The manual work requires almost absolute precision.

Leather interior of the car is cut by laser to Ensure accuracy, then check manually.

There are three types of leather used, in mà seats are fitted with soft leather.

Walnut wood is used pretty much Within the vehicle cabin. When cutting wood, the workers will stay here in case some Customers require the timber wall When the damage occurred. This ensures the wood line on the car is not varied thậm When the wall again.

The last step is to run tests on the road.